Home
About Us
Caterpillar Lift Trucks
Powered Equipment
Material Handling Equipment
Rental Equipment
Used Equipment
Parts
Service
Links
Employment Info
Site Search
Contact Information


The DONKEY Truck Carried Forklift has been designed to have the lowest overall operating cost & highest reliability in its class.  This has been achieved by the simplicity & efficiency of the overall design, as evidenced by the power shift transmission with torque converter, which drives through totally enclosed, oil bathed, final drive units.

Ease of operation & operator safety and comfort were a high priority in the development of the DONKEY.  One easy step from ground level seats the operator on a thickly padded foam seat with spring suspension & a safety belt.  The operator's right foot is in its natural position on the accelerator pedal which the left foot operates the service brakes.  The steering wheel & hydraulic controls are easily in hand; the view of the pallet is unobstructed, whether at truck bed level or on the ground.  Because of the predictable behavior of each well placed control, an inexperienced person can rapidly become a safe & productive operator.  

The DONKEY's truck mounting system is superior in terms of simplicity and reliability.  It requires no chains or bars that are operator placed, thereby reducing the likelihood of operator error.

 SPECIFICATIONS:

SINGLE-STAGE RETRACTABLE TUBE FORKS SINGLE-STAGE SCISSORS
TWO-STAGE DOUBLE SCISSORS FRONT VIEW

GENERAL

Lifting Capacity: 3000 or 4000 lbs.

At Load Center: 24"

Engine: Liquid Cooled Diesel

Transmission: 3-Speed Automatic

Steering Control: Power Rear Wheel

Tires: Pneumatic

Final Drive: Chain in Oil Bath

DIMENSION

Length A: 96 1/2"

Width B/Load Space G: 80"/53"

Optional: 91"/64"

Optional: 86"/59"

Height C: 91 1/2" Standard Tires

Fork Reach D: 24"

Fork Reach E: 27"

Fork Reach F: 30"

PERFORMANCE

Speed: 15 mph

Gradeability: 32%-2 Wheel Drive

WEIGHT

Operating Weight: 2500 to 3500 lbs

CHASSIS

Wheel Base: 68"

Tires-Drive: 27 x 10.5 x 15

Tires-Steer: 23 x 8.5 x 10

Ground Clearance: 6"

Brakes: Automotive Style Disc

POWER TRAIN

Engine: Kubota D1105

Cylinders/HP: 3/25

Transmission: GM Hydra-Matic

MAST

Single-Stage Tube or Scissor Fork:

(*Max. fork height/Overall lowered/Max. overall height)

     MFH 67"; OAL 94 1/2"; MOH 157"

     MFH 70"; OAL 97 1/2"; MOH 160"

     MFH 82"; OAL 109 1/2"; MOH 184"

     MFH 88"; OAL 115 1/2"; MOH 196"

Two-Stage Double Scissor Fork:

     MFH 72"; OAL 83"; MOH 119"

     MFH 96"; OAL 95"; MOH 143"

     MFH 120"; OAL 107"; MOH 167"

Tilt: 9 1/2" Degrees Forward; 6 1/2" Degrees Back

 

 Specification are for Donkeys equipped with standard tires and forks unless otherwise noted.  All specifications subject to change without notice or obligation.

OPTIONAL EQUIPMENT:

  • On-demand Third-Wheel Drive

  • Special Use Forks

  • Side Shift

  • 4-Cylinder 33 HP Engine

  • Wide Load Spacing

  • Terra Tires - 29 x 12.5 x 15 Drive, 23 x 10.5 x 12 Steer

  • Flotation Tires - 31 x 15.5 x 15 Drive, 24 x 13.5 x 12 Steer

  • Removable Mounting Plates

  • Strobe Light

  • Salt/Corrosion Package

  • Hydraulic Winch

  • Rear Counter Weight

  • Tie Down Hooks

  • Suspension Seat

  • Steer Only Flotation Tire

  • Push Off Attachment

  • Manual Fuel Shutoff

  • High Ground Clearance

[Home][About Us][Cat Lift Trucks][Powered Equip][Material Handling][Rental Equipment][Used Equipment][Parts Dept][Service Dept][Links][Employment][Site Search][Contact Info]

 

Copyright © 1997 Minnesota Supply Co.
All rights reserved.